Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
You can control the receiver to vibrate with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 433MHz
Receiver:
Model No.: Z-06
3 Modes: Vibration, Beep, Vibration and Beep
Decode: Learning code
Power Supply: 2 x AAA 1.5V Battery (included)
Size: 77mm x 38mm x 17mm
Transmitter:
Model No.: CB-1L
Channel: 1 CH
Remote Control Distance: 1000m / 3000ft
(theoretically)
Encode: EV1527 Learning code (up to 1million codes,
reducing code collision and unauthorized code scanning possibilities.)
Unit
size:
135mm x 42mm x 25mm
Power Supply: 1 x 6F22 -9V battery (included, can be used
for 12 months)
Usage:
Vibration mode: Press the button of
transmitter, the receiver vibrates for 5 seconds.
Beep mode: Press the button of
transmitter, the receiver beeps for 5 seconds.
Vibration & Beep mode: Press the
button of transmitter, the receiver vibrates and beeps together for 5
seconds.
Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of receiver again, switch to vibration & beep mode; press the button of receiver again, switch to vibration mode.
