1000M Wireless 999 CH Transmitter & 24 Receivers With Vibration and Beep Function

Here is the operation video: https://www.youtube.com/watch?v=H_UlKSrbvLk&feature=youtu.be

Feature:

• Wireless control.
• You can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
• Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
• One/several transmitters can control one/several receivers simultaneously.
• If you use two or more receivers in the same place, you can set them with different codes.
• Transmitting Frequency: 433MHz

Receiver:

• Model No.: Z-06
• 3 Modes: Vibration, Beep, Vibration and Beep
• Decode: Learning code
• Power Supply: 2 x AAA 1.5V Battery (included)
• Size: 77mm x 38mm x 17mm

Transmitter:

• Model: CM-999
• Channel: 999 CH
• Button: 12 buttons
• Remote Control Distance: 1000m / 3000ft (theoretically)
• Encode: Learning code
• Unit size: 117mm x 46mm x 15mm
• Power Supply: 3 x 1.5V batteries (included, can be used for 12 months)
• Frequency: 433MHz

Usage of transmitter:

• Transmit a wireless signal: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal.
• Delete wrong digit: If you press wrong digit before pressing the "Send" button, you can press "Delete" button to delete all numbers you pressed previously.

Usage of receiver:

• Vibration mode: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal, the corresponding receiver vibrates for 5 seconds.
• Beep mode: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal, the corresponding receiver beeps for 5 seconds.
• Vibration & Beep mode: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal, the corresponding receiver vibrates and beeps together for 5 seconds.
• Each channel of transmitter can control one receiver.
• Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of receiver again, switch to vibration & beep mode; press the button of receiver again, switch to vibration mode.

Note:

• If you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.

Package Include:

• 24 x Receiver: Z-06 (Vibration & Beep mode)
• 1 x Transmitter: CM-999
• 1 x User manual