Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Video:
This is a video about how to use this signal repeater to realize wireless
signal transfer:
https://youtu.be/kOawbWdkbXo
Package Include:
1 x Signal repeater: R-02
1 x User manual Note: The DC 12V/1A power adapter is not included, please purchase it
from the drop down menu.
Feature:
The signal repeater is a transceiver equipment that relays wireless RF
signal. It receives weak wireless signal and then send out this wireless
signal with strong power to extend the transmission distance.
Two frequency versions are available: 315Mhz and 433Mhz, you need to choose
same frequency for the repeater according to your signal.
Support multiple learning code and fixed code encoding chips.
Supports multiple oscillation resistors.
The repeater has learning function, it can learn and store 100 different
transmitter signals.
The repeater can only relays signals that have already been learned,
avoiding other unrelated signals.
Specification:
Working frequency: 315MHz / 433.92MHz
Working voltage: DC 12V
Support fixed code encoding chips: 2264, 2262, 2260, 2240
Support learning code encoding chips: 1527
Oscillation resistance range: 1.5M ~ 4.7M for fixed code, or 120K ~ 430K for
learning code
Standby current: 30mA
Working current: <255mA
Receiving sensitivity: -108dBm
Transmission power: 500mW
Transmission distance: 1500M in the open area
"POWER" LED: The power indicator. "SEND" LED: The relay indicator. When the signal is relayed, the LED
will illuminate.
8 Gang DIP switch: Each gang has on and off status, and the
instruction as below,
1-gang: ON position = 1.2M fixed code signal or 120K learning code signal.
2-gang: ON position = 1.5M/2.2M fixed code signal or 180K/220K learning code
signal.
3-gang: ON position = 3.3M fixed code signal or 300K/330K learning code
signal.
4-gang: ON position = 3.9M/4.7M fixed code signal or 390K/430K learning code
signal.
5-gang: ON position = Signal transmission time 3~5 seconds; OFF position =
Signal transmission time 1.5 seconds.
6-gang: ON position = Only relay signals that have been learned; OFF
position = Relay all signals.
7-gang: ON position = Learning signal status; OFF position = Normal working
status.
8-gang: ON position = Testing function (the repeater continuously transmits
a 1.2M fixed code signal; OFF position = Normal working status.
Operation:
1) Install two antennas to the repeater.
2) Connect to DC 12V power supply to the repeater, and the "POWER" LED will
be on.
3) Select the right signal mode by 1-gang to 4-gang. (Note: Only one gang
can be set to the ON position at the same time.)
4) Learn the signals that need to be relayed: Turn 6-gang and 7-gang to ON
Position, then trigger the transmitter, if the "SEND" ELD flashed twice, it
means learning is successful. After learning all transmitters, turn 7-gang
to OFF position.
5) Put the repeater in the right position between transmitter and receiver.
Delete all transmitters:
If you don’t want the repeater to work with the transmitter, you can delete
all codes of transmitters, which are stored in the repeater.
Operation: Turn off the power of the repeater, and turn 7-gang and 8-gang to
ON position, then turn on the power of the repeater, if the "SEND" LED
flashed 3 times, that means all stored codes have been deleted successfully.
Note:
1) Must turn 7-gang and 8-gang to OFF position after deleting the
transmitters.
2) Two antennas must be mounted upwards, and do not near the wall or metal
equipment.
3) The repeater is not waterproof.
4) The repeater must work at a DC12V power adapter with the current more
than 300mA.
