4 CH AC110V 220V Wireless Remote Radio Control Switch With 4 Receivers in Self-locking Mode

The AC RF remote control switch system. About 500 meters range. It can widely used in lights / lamps , motors, fans, cameras, video signals, audio signals, garage doors, electric shutter doors, telescopic doors, windows, cars, etc. This remote control has a Self-locking control mode. It is a low cost remote control with high quality. Extremely easy to install and use.

Manual

Feature:

• Wireless control, easy to install.
• Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances.
• You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
• Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
• One/several transmitters can control one/several receivers simultaneously.
• If you use two or more receivers in the same place, you can set them with different codes.
• Transmitting Frequency: 433MHz   

Receiver:  

• Model No.: S1T-AC110 / S1T-AC220
• Channel: 1 CH
• Control Modes: Self-locking
• Coding Type: Fixed code
• Coding Setting: By learning
• Power Supply (Operating Voltage): AC100~120V (S1T-AC110), AC200~240V (S1T-AC220)
• PCB size: 80mm x 35mm x 14mm
• Case size: 100mm x 40mm x 24mm
• Maximum Working Current: 3A

Transmitter:

• Model No.: CV-4
• Channel: 4 CH
• Remote Control Distance: 500m / 1500ft (theoretically)
• Encode: Fixed code by soldering
• Unit size: 110mm x 50mm x 18mm
• Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)   

Usage:

• Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire.
  1) Press button 1, turn on the lamp of receiver 1. Press button 1 again, turn off the lamp of receiver 1.
  2) Press button 2, turn on the lamp of receiver 2. Press button 2 again, turn off the lamp of receiver 2.
  3) Press button 3, turn on the lamp of receiver 3. Press button 3 again, turn off the lamp of receiver 3.
  4) Press button 4, turn on the lamp of receiver 4. Press button 4 again, turn off the lamp of receiver 4.

Package Include:

• 4 x Receiver: S1T-AC110 / S1T-AC220 (1 Channel / Self-locking Control Mode)
• 1 x Transmitter: CV-4
• 1 x User manual  

Note:

• The distance of 500m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance could not reach 500m. If you need longer range, you can choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here to link to; Or you can add the External Extend Antenna (model:0020909 ) on the receiver for improve the range - Click here to link to.