Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English French German


X
Hi, I'm Tom. Welcome to our shop, Carymart offers you the premium rf remote control equipment. We suggest you reading our FAQs before making your decision. If you have any other question, please contact us. We will reply you as soon as possible.

SKYPE
Contact Us


Home >>  RF Remote Control >>  12VDC Car Horn and LED Lamps Remote Controlled by 2 Channel Switch Momentary
Question 15/144
Previous Return To List Next

12VDC Car Horn and LED Lamps Remote Controlled by 2 Channel Switch Momentary

Question:
 

If I wire a 12v device into the receiver, I won't need to connect the device to its own power source. It gets power through this receive. Actually, I am ready to wire a 12v car horn into one channel and a set of 12v LEDs into the other, and wire the 12v DC in to my cars battery. Can I honk the horn and flash the lights from the remote?

 

Answer:
 

Our suggestion is that you can choose our 2 channel momentary 12VDC power output remote controller (S2XM-DC12 & C-2).

 

This is 12VDC direct power output, that is to say, you don’t have to supply your horn and led lamps to its own power because they can get through this receiver if you supply power to receiver. In addition, there are two channels for your devices you want to control. It is momentary controlling mode, which means that you press and hold button, the horn blares or led lamps flash constantly, but you release button, horn stops blaring or led lamps stop flashing. Two buttons on the transmitter are controlled horn and led lamps respectively. They won’t be interfered each other. 

 

You can follow the wiring diagram and picture to wire your horn and led lamps. Car horn is connected to terminals of relay 1 and led lamps are connected to terminals of relay 1 in parallel. Car battery is supplied to receiver. Thus, horn and led lamps can get power through receiver.

 

 
 
This question was added to our store on Tuesday 15 October, 2013.