Remote Control 120V Capacitor Start Motor for a Winch

You can try this AC motor remote controller (S1FC-AC220+CV-4-2), which features in forward-stop-reverse capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. Remote distance is up to 500M.

If you want to remote control two direction rotations, you can see the following wiring diagram and picture. Main wiring of motor should be wired to capacitor and “UP” terminal of receiver. The opposite terminal of main wiring should be connected to “COMMON” terminal. Secondary wiring is supposed to wire to “DOWN” terminal. You can exchange “UP” and “DOWN” wires of motor to change the rotating direction of motor.

Set Momentary control mode: Do not connect Jumper.

Press and hold button ? on remote or receiver, motor rotates continuously in positive direction.

Release button ? on remote or receiver: Stop the motor.

Press and hold button ? on remote or receiver, motor rotates continuously in reversal direction.

Release button ? on remote or receiver: Stop the motor.

Set Latching control mode: connect the Jumper.

Press button ? on remote or receiver, motor rotates continuously in positive direction.

Press ? on remote or receiver: Stop the motor.

Press button ? on remote or receiver, motor rotates continuously in reversal direction.

Press button ? on remote or receiver: Stop the motor.