Low Current Triggered Transmitter and 1 Channel Long Range Receiver Controls LED Runway Lights at Private Airport

We recommend the low current triggered transmitter (CB-2V) and 1 channel long range receivers (S1L-DC12-ANT2). The most remarkable feature of this transmitter is low current triggered. That is to say, when you offer dc power 5~28V to this transmitter, it will send signal out to the receiver. The receiver is long range with external extended antenna. When it works in pairs with transmitter, their transmitting distance can reach 2000m (6000ft) in the open field. One transmitter can send out ON signal to make several receivers ON at the same time if you use the same code of those transmitter and receivers.

Wires on the transmitter should be connected to the contacts of original device which can generate dc 5~28V output power.

The normally open contacts B&C of receivers should be connected to solar led light being controlled. Wire each solar led light to each receiver.

When the contacts of two wires of transmitter input 5~28V voltage, the transmitter is triggered and then transmits an rf signal “ON” to the receiver. After the receiver receives the signal, contacts B&C are closed; the solar led lights being controlled starts to work.

When the contacts of two wires of transmitter’s power is cut, the transmitter is triggered and then transmits an rf signal “OFF” to the receiver. After the receiver receives the signal, contacts B&C are cut; the solar led lights being controlled stops working.