Because some receivers have different output. They have several wiring methods as shown below:
1. How to connect AC motors to receiver -AC motor controller type
It control positive and reversal rotating direction of AC motors.The connection method is applicable to the following receivers:
S1FC-AC220, S1FM-AC220, S1PFC-AC220, S2PFC-AC220
Operation:
1) Connect the live wire of AC power supply to terminal “L / +” of INPUT, and connect the neutral wire of AC power supply to terminal “N / -” of INPUT.
2) Connect the neutral wire terminal of AC motor to terminals “COM” of receiver; connect the positive and reversal rotating terminals of AC motor to terminals “UP” and
“DOWN” of receiver. You can exchange “UP” and “DOWN” wires of motor to change the rotating direction of motor.
2. How to connect AC motors to the DC receiver -relay output type
It can control positive and reversal rotating direction of AC motors. The connection method is applicable to the following receivers:
S2M-DC12, S2L-DC12, S2U-DC12, S2UA-DC12, S2UW-DC12, S2DA-DC12, S2PDA-DC12, S2UB-DC12, S4UB-DC12, S2PU-DC12, S2PUB-DC12
S4PU-DC12, S2PUW-DC12, S4PUW-DC12, S4C-DC12, S4M-DC12, S4U-DC12, S6C-DC12, S8CA-DC12, S12CA-DC12, S15C-DC12, S16C-DC12
Operation:
If you want to control positive and reversal rotating direction of AC motor, do as following:
a. Connect the positive pole of DC power supply to terminal “L / +” of INPUT, and connect the negative pole of DC power supply to terminal “N / -” of INPUT.
b. Connect “normally open terminal “of receiver to the live wire of AC power supply, connect the neutral wire of AC power supply to the neutral wire terminal of AC motor.
c. Connect “Common terminal” of receiver to the positive and reversal rotating terminals of AC motor. You can exchange motor's two wires to change the rotating direction of
motor.
3. How to connect AC motors to the AC receiver -relay output type
It can control positive and reversal rotating direction of AC motors . The connection method is applicable to the following receivers:
S2U-AC220, S2MU-AC220, S2UB-AC220, S2UW-AC220, S2PU-AC220, S2PUB-AC220, S2PUW-AC220, S2DA-AC220
S2PDA-AC220, S6C-AC220, S4U-AC220, S4MU-AC220, S4UB-AC220, S4PU-AC220, S4PUW-AC220
Operation:
If you want to control positive and reversal rotating direction of AC motor, do as following:
a. Connect the live wire of AC power supply to terminal “L / +” of INPUT, and connect the neutral wire of AC power supply to terminal “N / -” of INPUT.
b. Connect “normally open terminal” of receiver to the live wire of AC power supply, connect the neutral wire of AC power supply to the neutral wire terminal of AC motor.
c. Connect “Common terminal” of receiver to the positive and reversal rotating terminals of AC motor. You can exchange motor's two wires to change the rotating direction of
motor.
 |
