Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
Introduction:
This receiver is a super long range remote switch. It is developed by LORA
(Long Range) wireless communication technology, so it has ultra-long working
distance, ultra-high receiving sensitivity, superior anti-interference
ability, and smaller power consumption. It uses a transceiver chip to
implement bidirectional communication. It’s ideal working distance is up to
5 kilometers, which is an excellent device for remote control and
long-distance communication.
Application:
This receiver is a wireless controller for AC motor, it and the transmitter
form a wireless transmitter receiver system. If you connect a AC motor to
this receiver, you can operate the motor to rotate in positive or reversal
direction by the remote control. You can connect two limit switches to the
receiver and use them to stop the motor. It can be used in rolling blinds,
rolling doors, projection screens, awnings, pumps, winches, conveyors or
other appliances and equipment with AC motors.
Feature:
Wireless control, easy to install.
Suitable for AC motors.
Super long working range: With the transmitter forming a complete set, the
maximum working distance may reach 5000 meters in an open area.
Waterproof: The receiver has a waterproof case and waterproof connector, it
can be installed outdoors.
Universal input: Support 110V AC (110V~120V) used in US, Canada, etc, and
220V AC (220V~240V) used in Germany, UK, France, etc.
High Power: It can work at maximum current 30A.
With limit control terminals: You can connect sensors, limit switches or
external devices to stop the motor.
You can use the transmitter / remote to control the receiver from any place
within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors,
doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built
in.
The receiver only works with the selected transmitter which is matched to
the receiver.
One or more transmitters / remotes can control one or several receivers
simultaneously.
Two or more receivers may be used in the same area.
Feedback Function:
The receiver and the transmitter have a Two-way working mode, so the user
can know the working status of the receiver by the transmitter.
Two-way working mode: When the receiver is successfully triggered by the
signal from the transmitter, it will immediately transmit a feedback signal
to the transmitter. When the transmitter receives this signal, it will send
out a buzzing sound to inform you that the receiver has been successfully
triggered.
Receiver Parameters:
Model: S1PFCW-AC-ANT3
Operating Voltage: 110~240V AC (110V/120V/220V/240V), but does not work on
US 220V motors.
Working Frequency: 433.92 MHz
Quiescent Current: ≤6mA
Channel: 1 CH, can work with 1 AC motor
Output Type: 110~240V AC (110V/120V/220V/240V)
Maximum Working Current: 30A / each channel, so motor's maximum starting
current cannot exceed 30A.
Suitable Wires for Connecting Terminals: 22-12 AWG
2 Selectable Modes: Momentary, Interlocking
Operating Temperature: -20 °C ~ +70 °C
PCB Size: 140 x 73 x 18 mm (5.5 x 2.9x 0.7 inches)
Case Size: 192 x 100 x 45 mm (7.5 x 3.9 x 1.8 inches)
Transmitter Parameters:
Model: 0021097 (CC-3-2)
Channel / Button: 3
Button Symbol: ▲, ■, ▼
Operating Voltage: 9V (1 x 6F22-9V battery, can be used for 12 months)
Quiescent Current: 5μA
Working Current: 65mA (when the transmitter is transmitting the signal),
16mA( when the transmitter is receiving the signal).
Operating Frequency: 433.92 MHz
Modulation Mode: FSK + LORA
Maximum Transmitting Distance: 5000 meters / 15000 feet (theoretically)
Operating Temperature: -20°C ~ +70°C
Unit Size: 135 x 42 x 25 mm (5.3 x 1.7 x 1.0 inches)
Matching Transmitters:
This receiver only works with 5000m transmitters, such as model
CC-3-2
(5000 Meter / 15000 feet).
Super Long Working Range:
The receiver and the transmitter form a wireless remote control switch, the
maximum working distance may reach 15000 feet or 5000 meters in an open
area.
The maximum working distance is based on theoretical data without obstacles
and any RF interference. In practice, it will be hindered by trees, walls,
or other construction, and will be interfered with by other wireless
signals. Therefore, the actual working distance may not reach this maximum
distance.
Usage:
The receiver can be used to control AC 110~240V (110V/120V/220V/240V) motor.
Note: It does not work on US 220V power supply or 220V motors.
Wiring:
If you want to control an AC 120V motor, do as following:
1) Connect the live wire of AC power supply to terminal L, and connect the
neutral wire of AC power supply to terminal N.
2) Connect the forward wire of the AC motor to the terminal UP, connect
the reverse wire of the AC motor to the terminal DOWN, and connect the
neutral wire of the AC motor to the terminal COM.
Setting different working modes:
The receiver will be set in Interlocking mode before leaving the factory, if
you require momentary mode, please follow the following steps.
1) Setting Interlocking mode: Turn on the second bit of the dip switch.
The operation of Interlocking mode with the transmitter CC-3-2:
Press the button ▲ on the transmitter: Motor rotates in positive direction.
Press the button ▼ on the transmitter: Motor rotates in reversal direction.
Press the button ■ on the transmitter: Motor stops.
2) Setting Momentary mode: Turn off the second bit and the third bit of the
dip switch.
The operation of Momentary mode with the transmitter CC-3-2:
Press and hold the button ▲ on the transmitter: Motor rotates in positive
direction.
Release the button ▲: Motor stops.
Press and hold the button ▼ on the transmitter: Motor rotates in reversal
direction.
Release the button ▼: Motor stops.
Limit control terminals:
The receiver has limit control terminals, and you can connect external
devices (with normally closed contact), such as sensors, limit switches to
limit terminals, then use them to stop the motor.
For example, you can connect a normally closed limit switch to the two
terminals of S1, and connect another normally closed limit switch to the two
terminals of S2.
When the motor rotates in positive direction, if disconnect two terminals of
S1, the motor will stop automatically.
When the motor rotates in reversal direction, if disconnect two terminals of
S1, the motor will stop automatically.
How to pair the transmitter to the receiver:
Notice: We have paired the transmitter to the receiver before leaving the
factory. If you want to pair more transmitters, please follow the following
steps.
1) Press the learning button in the receiver for 1-2 seconds, until the
signal LED on the receiver turns on, this indicates that the receiver enters
the learning status.
2) Press any one button on the transmitter, if signal LED flashes 3 times
quickly and then goes off, this indicates that the pairing is successful.
3) The receiver can learn several transmitters with different codes.
How to delete all transmitters codes stored in the receiver:
We have paired the transmitter to the receiver, if you don’t want the
receiver to work with the transmitter, you can delete all transmitters codes
stored in the receiver.
Operation: Press and hold the learning button in the receiver for 3-4
seconds, the signal LED first comes on, then flashes 3 times quickly and
then goes out, at this time release the learning button, this indicates that
all stored codes have been successfully deleted successfully.
Package Include:
1 x Receiver: S1PFCW-AC-ANT3
1 x Transmitter: CC-3-2
1 x User manual
