Hi, I'm Tom. Welcome to our shop,
Carymart offers you the premium rf remote control equipment.
We suggest you reading our FAQs before making your decision.
If you have any other question, please contact us.
We will reply you as soon as possible.
You can control the receiver to vibrate with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Transmitting Frequency: 433MHz
Receiver / Vibrator:
Model No.: Z-06
3 Modes: Vibration, Beep, Vibration and Beep
Decode: Learning code
Power Supply: 2 x AAA 1.5V Battery (included)
Size: 77mm x 38mm x 17mm
Transmitter:
Model No.: CB-6
Channel: 6 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by soldering
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)
Usage:
Vibration mode: Press the button of transmitter, the corresponding receiver vibrates for 5 seconds.
Beep mode: Press the button of transmitter, the corresponding receiver beeps for 5 seconds.
Vibration & Beep mode: Press the button of transmitter, the corresponding receiver vibrates and beeps together for 5 seconds.
Each button of transmitter can control one receiver.
How to change the working mode:
As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of receiver again, switch to vibration & beep mode; press the button of receiver again, switch to vibration mode.
