Wireless Control Vibration & Beep Tri-mode Transmitter Receiver Kit

Video

  Feature:

• Wireless control.
• You can control the receiver to vibrate with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
• Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
• One/several transmitters can control one/several receivers simultaneously.
• If you use two or more receivers in the same place, you can set them with different codes.
• Transmitting Frequency: 433MHz  

Receiver:

• Model No.: Z-06
• 3 Modes: Vibration, Beep, Vibration and Beep
• Decode: Learning code
• Power Supply: 2 x AAA 1.5V Battery (included)
• Size: 77mm x 38mm x 17mm   

Transmitter:

• Model No.: C-1
• Channel: 1 CH
• Remote Control Distance: 100m / 300ft (theoretically)
• Encode: Fixed code by soldering
• Unit size: 58mm x 39mm x 16mm
• Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)  

Usage:

• Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.
• Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.
• Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.
• Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of receiver again, switch to vibration & beep mode; press the button of receiver again, switch to vibration mode. 

Package Include:

• 1 x Receiver: Z-06 (Vibration & Beep mode)
• 1 x Transmitter: C-1
• 1 x User manual  

Note:

• If you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.